WAGO® | Terminal Blocks, Wire Connectors & Automation Solutions Canada

Streamline industrial wiring, eliminate terminal retightening, and accelerate panel construction with spring pressure interconnection and automation hardware from WAGO in Canada. Pioneering spring pressure connection technology with patented CAGE CLAMP®, Push-in CAGE CLAMP®, and PUSH WIRE® systems, WAGO delivers gas-tight, vibration-proof, and maintenance-free electrical connections. Designed to meet strict CSA, UL, IEC, and ATEX standards, WAGO components ensure continuous conductivity and operational uptime across industrial processing, building automation, energy, and OEM equipment installations.

Our inventory features authentic WAGO products spanning DIN-rail terminal blocks, PCB connectors, and iconic 221 Series lever-actuated splice connectors. Beyond interconnection, WAGO provides robust interface electronics—including EPSITRON® power supplies, signal conditioners, and isolation relays—alongside modular WAGO I/O System 750 PLCs and fieldbus couplers. Resistant to temperature fluctuations, mechanical shock, and severe vibration, WAGO components accommodate solid, stranded, and fine-stranded copper conductors without special tools, delivering superior termination density and long-term contact integrity.

WAGO® | Terminal Blocks, Wire Connectors & Automation Solutions Canada

All Products

2002-402-WAGO | Push-in type jumper bar; insulated; 2-way; Nominal current 25 A; light gray

831-1202 – WAGO | 1-conductor male connector; lever; Push-in CAGE CLAMP®; 10 mm²; Pin spacing 7.62 mm; 2-pole; 100% protected against mismating; 10,00 mm²; light gray

258-5014-WAGO | Thermal transfer ink ribbon; for Smart Printer; for self-laminating labels; black

2201-1205 – WAGO | 2-conductor through terminal block; with push-button; 1.5 mm²; with test port; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,50 mm²; black

2002-405-WAGO | Push-in type jumper bar; insulated; 5-way; Nominal current 25 A; light gray

249-116-WAGO | Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray

2002-1201-WAGO | 2-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray

2010-1209 – WAGO | 2-conductor through terminal block; 10 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm²; light gray

2006-1291-WAGO | End and intermediate plate; 1 mm thick; gray

2002-1291-WAGO | End and intermediate plate; 0.8 mm thick; gray

221-413/K194-4045-WAGO | LEVER-NUTS® splicing connector; 3-conductor with operating levers; 24-12 AWG; transparent housing; Box of 50 pieces

2004-1291-WAGO | End and intermediate plate; 1 mm thick; gray

2004-1207-WAGO | 2-conductor ground terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; green-yellow

221-415/K194-4045-WAGO | LEVER-NUTS® splicing connector; 5-conductor with operating levers; 24-12 AWG; transparent housing; Box of 25 pieces

2004-1201-WAGO | 2-conductor through terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; gray

2002-408-WAGO | Push-in type jumper bar; insulated; 8-way; Nominal current 25 A; light gray

788-512-WAGO | Relay module; Nominal input voltage: 24 VAC; 2 changeover contacts; Limiting continuous current: 8 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray

787-732 – WAGO | Power supply; Eco; 1-phase; 24 VDC output voltage; 10 A output current; DC-OK LED; 4,00 mm²

2002-1207-WAGO | 2-conductor ground terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; green-yellow

859-801-WAGO | 24VDC in to 5VDC 0.5 A output