XW-210-I – ControlByWeb® | Single Relay & Input Module

$ 330.00

Experience streamlined remote relay and input control with the Control By Web XW-210-I WebRelay. This versatile electromechanical relay module, equipped with a built-in web server and optically isolated input, offers seamless integration for monitoring dry contacts or controlling industrial equipment over the internet.

Bulk Order Discount

QuantityDiscountPrice
10 +5%$ 313.50

3 in stock (can be backordered)

SKU: XW-210-I Category:
Inquire

Description

The WebRelay Wireless™ XW-210-I is a versatile, WiFi-enabled electromechanical relay with a built-in web server and an optically isolated digital input. Ideal for controlling electrical devices and monitoring temperature or switch-closure sensors in locations where Ethernet wiring is not feasible, this module is powered by various external sources, including wall transformers, solar panels, or other DC power sources.

Key Features

  • Connectivity and Control:
    • Built-in WiFi for remote I/O
    • Built-in web server for easy configuration and control
    • Peer-to-Peer Communication
    • Email Notifications
    • No-Code Logic Builder for custom logic creation without programming

Applications

  • Fridge & Freezer Monitoring
  • Door & Gate Access Control
  • Environmental Monitoring

Specifications

  • Power Requirements:
    • Voltage: 9-28 VDC
    • Max Current: 188 mA Max
  • Wireless:
    • Network Standards: IEEE 802.11 b/g/n
    • Frequency Band: 2.412 – 2.462 GHz
    • Wi-Fi Security Standards: Open, WEP, WPA, WPA2
    • Network Settings: DHCP or Static
    • Wireless Range: Up to 250ft (typical, depending on environment)
    • Antenna: External, 2.4 GHz, 50Ohm, omni directional, 1/4 wavelength, gain: ≤ 2.1dBi. With articulated reverse SMA connector
    • RF Output Power: 14dBM (802.11b/g), 12dBM (802.11n)
  • Operation:
    • Provisioning: Via internal web server (no cables or PC utilities needed)
    • Access Point: Yes, push button activated
    • WPS: Yes, push button activated (Wi-Fi Protected Setup)
    • Connectivity: Always connected
    • Remote Server: ControlByWeb’s X-600M™ or cloud-based server
    • Polling: state.xml (web-server is always active)
  • Relay Contacts:
    • Number of Relays: 1
    • Max Voltage: 277VAC, 30VDC
    • Max Current: 12A
    • Contact Type: SPDT (Form C)
    • Load Type: General Purpose
    • Contact Resistance: < 30 milliohms initial
    • Contact Material: AgSnO2
    • Electrical Life: 100K cycles (Typical)
    • Mechanical Life: 10M cycles (Typical)
    • Relay Modes: ON/OFF or Pulsed
    • Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)
  • Digital Inputs:
    • Number of Inputs: 1
    • Type: Optically-Isolated
    • Voltage Range: 4-26 VDC
    • Current: 950uA @ 4V, 8.5mA @ 26V
    • Minimum Hold Time: 25ms
    • Input Functions: Monitor, Local Relay Control, Remote Relay Control
    • Maximum Count: 24-bit
    • Max Count Rate: 20Hz Max (Dependent on Configuration)
    • Edge Trigger: Rising, Falling, or Both
  • Temperature Sensors:
    • Maximum Number of Sensors: 4
    • Type: Dallas Semiconductor DS18B20
    • Temperature Range: -67°F to 257°F (-55°C to +125°C)
    • Accuracy: ±0.5°C (from -10°C to +85°C)
    • Sensor Functions: Monitor Temperature, Email Alerts, Control Relays
  • Humidity Sensors:
    • Type: Xytronix Model X-DTHS-P sensor
    • Humidity Range: 0-100% RH
    • Accuracy: ±2%
  • Real-Time Clock:
    • Manual or NTP (Network Time Protocol) setup
    • NTP Sync Period: Once, Daily, Weekly, On Powerup
    • Auto Daylight Savings Adjustment
  • Connectors:
    • Relay: 3-Position Removable
    • Power/Input/Temperature: 8-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire
  • Push Buttons:
    • Button 1: Force access-point mode
    • Button 2: Activate WPS mode
  • LED Indicators:
    • Power on
    • Relay coil energized
    • Digital Input
    • Network linked
  • Physical:
    • Operating Temperature: -40°F to 135°F (-40°C to 57°C)
    • Storage Temperature: -40°F to 185°F (-40°C to 85°C)
    • Humidity: 5% to 95% non-condensing
    • Size: 1.41in (35.7mm) wide, 3.88in (98.5mm) tall, 3.1in (78mm) deep (not including connector)
    • Weight: 5 oz (142 grams)
    • Enclosure Material: Lexan 940 Polycarbonate Plastic
    • Enclosure Flame Rating: UL94 V0
  • Protocols:
    • HTTP, XML, SSL, Modbus TCP/IP, SMTP
  • Logging:
    • Log File Size: 512K
    • Storage: Nonvolatile Flash
    • Buffer Architecture: Circular Buffer

Advanced Features

  • BASIC Interpreter: Allows for script-based automation.
  • Remote Services: Enables secure remote access.
  • Password Settings: Configurable password protection for setup and control pages.
  • Electromagnetic Compliance: Complies with FCC, IEC, and other international standards.
  • Product Safety Compliance: UL 61010-1 (Electrical Equipment for Measurement, Control, and Laboratory Use)

 

Weight 0.5 lbs
Dimensions 4 × 2 × 4 in
Part Number

Reviews

There are no reviews yet

Add a review
XW-210-I - ControlByWeb® |  Single Relay & Input Module XW-210-I - ControlByWeb® | Single Relay & Input Module
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please confirm that you are not a robot

Q & A

Ask a question
XW-210-I - ControlByWeb® |  Single Relay & Input Module XW-210-I - ControlByWeb® | Single Relay & Input Module
Your question
* Question is required
Name
* Name is required
There are no questions yet