DVTG0110E – MTE | dV E-Series, 208-600V, 110A, 2-4kHz, NEMA 1/2

Description

The MTE dV E-Series dV/dt motor protection filters are designed to safeguard motor windings and prevent premature insulation failure, ensuring uninterrupted operation and minimizing downtime. These filters provide superior motor protection, extend cable life, and are engineered with a compact and efficient design. Backed by MTE’s Performance Guarantee, they offer triple protection against reflective waves, peak voltage spikes, and rise time reduction, meeting NEMA MG 1-1998 Section 31 motor standards.

Key Features

• Triple Protection: Reflective wave mitigation, peak voltage protection, and rise time reduction.
• Efficiency: Up to 60% more efficient, reducing operational costs and heat generation.
• Compact Design: 73% lighter and 35% smaller footprint for easy installation and handling.
• Quiet Operation: Operates as quietly as a conversation, minimizing noise pollution.

Specifications

• Voltage: 208 – 600 VAC +/- 10%, 60Hz
• Input Voltage Wave Form: PWM
• Inverter Switching Frequency: 2kHz – 4kHz (3A – 750A)
• Inverter Operating Frequency: 0-60Hz without derating
• Maximum Ambient Temperature:
  • Modular filter: -40°C to +60°C
  • Enclosed filter: -40°C to +50°C
  • Storage: -40°C to +90°C
• Insulation System: Class N (200°C)
• Insertion Loss (Voltage): 1.7% at 60 Hz
• Efficiency: >99%
• Current Range: 3A – 750A
• Available Form Factors: Kit, Open Panel, NEMA 1/2, NEMA 3R
• Altitude: 6,600 feet above sea level without derating
• Maximum Motor Lead Length: 1,000 feet (VFD rated cable recommended)
• Relative Humidity: 0% to 99% non-condensing
• Current Rating:
  • 100% RMS Continuous
  • 150% for 1 minute
  • 200% for 10 seconds (Operating in overload increases proportional voltage drop)
• Audible Noise: <65db at 1 meter
• Rise Time: Greater than 0.1 µS
• Peak Voltage @ Motor: 150% of DC bus voltage up to 1,000 feet
• Manufacturer Part Number: DVTG0110E
• HP Ratings:
  • 40 hp @ 240 VAC
  • 75 hp @ 480 VAC
  • 100 hp @ 575 VAC
  • 100 hp @ 600 VAC
• Terminals: Wire Leads
• Mounting: Surface
• NEMA Rating: NEMA 1, NEMA 2
• Approvals: CE, cULus

DVTG0110E